Model A Isolation

Rupture Pin Model A ESV Valve

Model A Isolation

The Model A is an angle body valve that holds a bubble-tight, open position until flowing pressure acting on the unbalanced stem area puts an axial force on the pin. At set point, the pin buckles and the valve closes for a bubble-tight seal. In case of a downstream line break, the mass velocity impinging on the lower piston surface will force the pin to buckle and the valve will seal closed. Unlike conventional valves and rupture discs, the Model “A” proves it is environmentally friendly by keeping you from flaring production or venting production to the atmosphere.

Set Pressure: 40 – 500 Psi (For other set pressures, contact Taylor Valve.)
Accuracy: + / – 5%
Connections: Standard 2″ NPT and custom connections available.
Seals: Available for high & low temperatures, viton standard.
Standard Materials: Body mild steel, stainless steel trim is standard, other materials optional.

Download brochure for complete details on features, advantages and benefits of the Model A Isolation valve.

NOTE: Taylor Valve reserves the right to change product designs and specifications without notice.

The Model A Isolation valve keeps well pressure from exceeding D.O.T. transmission limits and protects the meter run from excess pressure. It is part of our line of pressure isolation valves is primarily used to prevent damage to downstream equipment including meter houses and line transitions.

Model A Operation Chart

Like What You See?